跳至內容

我應該害怕蟻酸嗎?

有位客戶(我視他為朋友)問我,是否有關於蟻酸的資訊。 我目前所知的內容似乎對蟻酸有些不公,因此想請教各位,是否有人能提供另一面的觀點:

In my opinion, the decision to use formic acid simply to avoid problems with a non-optimized flux process is usually based on a misunderstanding of flux and an unwillingness to optimize the process. If flux residue is the issue, all modern fluxes can be cleaned with DI water or commercially available cleaners depending on chemistry. I do believe formic acid has a good niche in assembly at lower or higher temperatures than flux can handle (<100degC or >350degC). I would only trust it in a system that is designed and proven to contain the formic acid, it does sound dangerous if it escapes.

根據維基百科:

「甲酸易被人體代謝並排出體外。儘管如此,它仍具有特定的毒性作用;甲醇代謝產物中的甲酸與甲醛,正是導致甲醇中毒時出現視神經損傷並引發失明的主因。[11] 已有文獻記載了接觸甲酸所導致的某些慢性影響。部分動物實驗證實甲酸具有致突變性,且長期接觸可能導致肝臟或腎臟損傷。長期接觸的另一種影響是引發皮膚過敏,此過敏反應會在再次接觸該化學物質時顯現。」

公平地說,他們對助焊劑的評價是這樣的:

「酸性助焊劑(電子產業中未使用)可能含有氯化鋅或氯化銨,這兩種物質均對人體有害。因此,處理助焊劑時必須佩戴手套和護目鏡,並在通風良好的環境下使用。」

電子產業中使用的現代助焊劑,其設計初衷是在室溫下無害。 由於我對助焊劑有過親身經驗,難免會有些偏見,因此我想提出一個開放式問題:我是否忽略了什麼? 如果您認為甲酸比我原先所知更安全,或者您有使用過這種材料的經驗並願意分享,請留言評論。

謝謝、

~Jim