Conclusion of In Electronics Manufacturing, Does Cpk =1 Yield 66,800 defects per million?
Patty, Rob and Pete were quite sure they understood the confusion in the Cpk = 1 issue, but wanted to make sure they discussed it with the Professor.&...
Patty, Rob and Pete were quite sure they understood the confusion in the Cpk = 1 issue, but wanted to make sure they discussed it with the Professor.&...
Folks, Patty was walking past the Professor’s office on her way to see Pete and Rob and she thought she would stop in. “Professor, I got t...
Solder Joint Failure Implicated in AirAsia Flight 8501 Crash: Patty was heading down to the Professor’s office to discuss the Reliability Engine...
Patty, Rob, and Pete were headed to their regular monthly meeting where they, along with the Professor, discussed a book they were all reading....
Patty had just returned from SMTAI 2015. It was a sentimental meeting with the retirement of longtime executive administrator, JoAnn Stromberg ....
Folks, Let’s see how Patty, Rob and Pete are doing helping Mike Madigan establish his “Zero Defects” program….. “So let...
Just 1% more productivity in a factory line can equate to 3% more profitability. Dr. Ron Lasky, Senior Technologist at Indium Corporation, explains to...
Phil Zarrow: Ron, we’ve discussed that performance of materials can affect productivity, and hence profitability. Can you give us an example? ...
Dr. Ron Lasky, Senior Technology at Indium Corporation, explains how simple tweaks to day-to-day operations can drastically improve electron...
Folks, It looks like Patty is a bit troubled....... When she was younger, Patty was always annoyed by cranky old people, and now she was worryin...
Folks, It is hard to imagine, but it has been just a little short of 13 years ago that Jim Hall, Phil Zarrow and I approached SMTA’s JoAnn Strom...
Folks, I ran into good friend Phil Zarrow the other day. Phil, Jim Hall, and I developed the SMTA Certification Prog...