The Fred and Bob Breaks Saga Continues
(continued from previous post) “Fred break, Bob break?” Phil asked. Folks, The “Fred and Bob Breaks“ saga continues, &ldq...
(continued from previous post) “Fred break, Bob break?” Phil asked. Folks, The “Fred and Bob Breaks“ saga continues, &ldq...
After a long and involved conversation with colleagues regarding attaching heat pipes using a low temperature solder, such as Indalloy 290 (97In 3Ag; ...
Folks, My interest was piqued by a recent article from the pen of good friend, Ray Rasmussen. In this a href="http://www.pcbdesign007.com/pa...
I just visited a customer that was converting from water soluble solder paste to no-clean. Not exactly a slam dunk transition as this customer found o...
Although most scientists today feel that alchemy has been widely discredited, and I have been taught to agree, the idea of it is whimsical and exhilar...
Folks, A compilation of my blog posts, titled, The Adventures Of Patty And The Professor, is now available in soft and hard copies. The advantage...
Spending back-to-back weeks at two electronics assembly trade shows is a unique experience, to me. First up was SMTAI in Orlando, FL where I...
Folks, I was at SMTAI (Surface Mount Technology Association International) from September 24 and 27, 2010. As I mentioned, I cha...
Recently I was at a customer who reported that their SMT components were “blowing off” their PCB. In most of the instances the component w...
Folks, I will be at SMTAI (Surface Mount Technology Association International) September 26 and 27, 2010. I chair a session on A...
Last week in L.A. I met up with Hoa Nguyen (VP of R&D, OKInternational) at Solar Power International. The full post and video are available here.H...