ブログ

(continued from previous post) “Fred break, Bob break?” Phil asked. Folks, The "Fred and Bob Breaks"saga continues, “Fred is the tech responsible for the stencil printer

Folks, Dr. Phil James, a former student of “The Professor”, gets a phone call, let’s listen in…… Phil James was staring out the window of his office in Exeter, NH.Fall

I just visited a customer that was converting from water soluble solder paste to no-clean. Not exactly a slam dunk transition as this customer found out. During my visit, solder balls and solder

今日、ほとんどの科学者は錬金術が広く信用されていないと感じているし、私もそう教えられてきた。

最近、私はいろいろなことを研究しているのだが、その中でも好きな話題のひとつがはんだ合金だ。長い間、ほとんどのはんだ（ほぼすべて）は錫-鉛共晶合金で構成されていた。

I have previously discussed various reasons why thermal considerations in a device cannot be an afterthought.There are various methods for handling the thermal needs of a device before it becomes a

ガリウム液体金属合金の使用について、数多くの質問をいただきましたので、その回答の一部を皆さんにご紹介しようと思います。お客様からの質問は黒字で、私の回答は赤字で記載しています。

......そしてまた、「あるバンプの高さやバンプを得るためには、はんだ粉の粒子をどの程度小さくすればよいのか」という問題に戻る。

今週のトピックは、ソルダーペーストを使用したウェーハバンピングと基板バンピングの両方と、パウダーの問題である。

Solder paste is made to be reflowed in the SMT process. Exactly HOW that is done is critical to your success. Included in the Product Data Sheet, among other things, are parameters which guide the

The Northeast USA (as well as other parts of the country) have been experiencing quite a warm summer. And, if walking out into the humidity wasn't clue enough, I would just have to test the fit

Folks, The adventures of Patty and Rob continue……. Rob bolted upright in bed. He had that terrible feeling that he had overslept for an important appointment. His eyes quickly found the

Folks, The adventuresofPatty and Rob continue…….. “No way Rob. I can’t buy this one,” shouted Phil. “I’m telling you I did all of the calculations. I know it

Folks, Patty and Rob return from their honeymoon……. Patty had just finished some emails and was ready to head off to meet Rob and some of their buddies for

My friend and colleague, Eric Bastow, got back last month from an IPC standards meeting with some interesting news for those of us who supply and use solder

Wandering through the references to indium metalon the internet, I sometimes see it referred to as, "that 'rare'

Folks, After a bit of a break, the adventures of Patty, Rob, and The Professor continue: The plane droned on as it made its slow march from Detroit to Tokyo. Patty looked down at Rob as he slumbered

インジウム・コーポレーションは何年も前からはんだボールを製造しており、「はんだボールを作るために必要なことは何でもする」という評判を得ている。

I mentioned in a previous a blog posting that the primary driver for halogen-free electronics is ostensibly environmental, but that the confusion about “which halogens and which molecules and

Folks, After my recent post on the fact that there was no data linking tin whiskers to the Toyota sudden acceleration issues, there continue to be more posts saying things like “Tin Whiskers

Graping is a phenomenon which appears as un-reflowed solder particles, typically seen on the surface of the solder joint. The graping phenomena has become more common due to some of the following