跳至內容

Indium Corporations 的 Sze Pei Lim 將於台北舉行的 IMPACT 會議上發表關於焊點可靠性的演講

Indium Corporation半導體與先進材料部門資深全球產品經理Sze Pei Lim,將於 10 月 27 日在台灣台北舉行的「國際微系統、封裝、組裝與電路技術(IMPACT)」會議上參與小組討論。該場次將探討題為《氣孔對第一級互連焊點可靠性的影響》之技術論文的研究成果。

First level interconnect (FLI), e.g., flip-chip attach on substrate or wafer, using solder as the interconnect material, is employed extensively in advanced packaging assembly. During the flip-chip die-attach process, some voids are often formed in the solder joints. In the past, this may not have been seen as a major issue since the voiding percentage is typically less than 10%; however, as miniaturization continues, the solder joint of FLI is becoming smaller (<100m bump or Cu pillar size) with tighter pitch and higher density, there is an increasing concern with how the micro voids in the solder joint will affect the package’s long-term reliability even though the void percentage is not excessive. This paper will describe the details of the different test conditions, and discuss observations from the failure analysis done with cross-sections and electron backscatter diffraction (EBSD) analysis.

身為半導體與先進材料部門的資深全球產品經理,Lim 與研發及製造部門密切合作,並與全球領先的半導體公司及代工製造商保持緊密聯繫。她是國際電子製造倡議(iNEMI)封裝技術整合小組的專案小組成員,並在過去五年中共同主持了多項產業專案及路線圖規劃計畫。 她同時也是電機電子工程師學會(IEEE)封裝學會馬來西亞分會執行委員會的成員。 林女士是國際電子製造技術大會(IEMT)籌備委員會的成員。她撰寫了多篇技術論文,並定期在各類國際技術會議上發表演講。她擁有新加坡國立大學的學士學位,主修工業化學,專攻聚合物領域。她是認證表面貼裝技術(SMT)製程工程師,並已取得六西格瑪綠帶認證。

關於 Indium Corporation

Indium Corporation 是全球電子、半導體、薄膜和熱管理市場的主要材料精煉商、冶煉商、製造商和供應商。產品包括焊料和助熔劑、銅钎、熱介面材料、濺鍍靶材、铟、鎵、錫金屬和無機化合物,以及 NanoFoil 。公司成立於 1934 年,擁有全球性的技術支援,工廠分佈於中國、德國、印度、馬來西亞、新加坡、南韓、英國和美國。

如需進一步了解 Indium Corporation 的相關資訊,請造訪indiumstg.wpenginepowered.com或寄送電子郵件至Jingya Huang。您也可以在www.linkedin.com/company/indium-corporation/或@IndiumCorp 追蹤我們的專家專欄「From One Engineer To Another」(#FOETA)。