Packaging NanoFoil® Preforms
NanoFoil® can be packaged in tape & reel, bulk containers, or waffle packages. Here are the main advantages of each type of packaging: Tape &a...
NanoFoil® can be packaged in tape & reel, bulk containers, or waffle packages. Here are the main advantages of each type of packaging: Tape &a...
There are many sputtering target materials that are tricky to solder to. For those alloys we ‘bring out the big guns’ – in this case...
In order to NanoBond® parts that are made out of copper, nickel, or platinum, we must first apply solder to the bonding surface. This......
Folks, Our discussion of Weibull Analysis continues…..Let’s say you have worked hard and assembled some SMT lead-free PCBs for thermal c...
Aluminum is a very common material to bond to, although it is a little tricky to solder to with traditional methods. The method that we......
The 2013 IPC APEX Expo , the premiere electronics assembly event, is right around the corner – and our technology experts are ready to share the...
NanoFoil® is a great localized heat source, but it can cause some ugly looking aesthetic defects if the process is not set up correctly. Let̵...
There have been a variety of people who were key to the development of indium metal in general, and Indium Corporation in particular, over the ye...
Sometimes one piece of NanoFoil® just isn’t enough… We often NanoBond® sputtering targets which are large enough to require multi...
If you have some NanoFoil® on hand at your facility and you do not have the original packaging, all hope is not......
Hand cutting is only one option for shaping NanoFoil®, however it is quick, easy, and inexpensive. All you need to......
One of our customers discovered a little trick to save some time and avoid having his parts sent out for tin plating. At a......