SMT Components "Blowing-Off" PCB
Recently I was at a customer who reported that their SMT components were “blowing off” their PCB. In most of the instances the component w...
Recently I was at a customer who reported that their SMT components were “blowing off” their PCB. In most of the instances the component w...
Indium Corporation will be at IMAPS 2010 (International Microelectronics and Packaging Society) – their 43rd International Sympos...
Did you ever hear the expression, “think like a 12-year-old”? Meaning a 12-year-old has enough learning to address a problem but not...
… and we’re back on the question of “how small a solder powder particle do I need, to achieve a certain bump height or bump diameter...
This week’s topic is both wafer bumping and substrate bumping with solder paste, and the issue of powder size. I’ve recently been dea...
George Will once said, “The nice part about being a pessimist is that you are constantly being proven right or pleasantly surprised.” Well...
Folks, Answers to the quiz of a few weeks back…... Phil and Rob had agreed to ask the GM if it was OK to ask the tech and engineers at some of...
Solder paste is made to be reflowed in the SMT process. Exactly HOW that is done is critical to your success. Included in the Product Data Shee...
I had a call with a few engineers today who wanted me to answer a question, “Which solder paste do I pick for my application.” Sure there ...
Welcome! I am a chemical engineer experienced in an R&D setting and jumping into a new position in marketing here at Indium Corpora...