Improve SMT Stencil Printing using StencilCoach®
This video is for electronics assembly engineers, technicians, and managers that are seeking to improve SMT stencil printing. It includes details abou...
Solder
SMT Line Balancing using LineCoach® Software
This video is for electronics assemblers that are seeking the correct wave soldering profile, as well as optimal line balancing. This includes real-wo...
80Au20Sn: Superior Physical Properties
In my previous post we saw that 80Au/20Sn eutectic alloy performs as both a solder or a braze. This is due to its unique and valuable properties. Let&...
Handbook of Electronic Assembly Now Available
Folks, It is hard to imagine, but it has been just a little short of 13 years ago that Jim Hall, Phil Zarrow and I approached SMTA’s JoAnn Strom...
Achieving Uniform Solder Bondline Control Between Substrate and Baseplate in IGBTs: Part I
The next few posts come to us from my colleagues Karthik Vijay, Indium Corporation’s Technical Manager for Europe and Liam Mills of TT Electroni...
What is an Intern to Do?
The Indium Corporation has many summer interns this year. The technical support group was fortunate enough to hire Sarah Bjornland (pictured). She is ...
Solder Reflow Equipment Options
Most of our customers use whatever heating method they already have, unless they are starting from scratch or unless there is a reason their existing ...
Estimating the Per Cent Gold In An Alloy: "Wet Gold Technique" Only Works with One Alloying Element… and You Must Know What That Element Is
Folks, The Wet Gold Technique is a simple way to estimate the percentage of gold in a gold alloy. This technique indirectly measures the density...
Solder Technology Inside A Hot Car On A Sunny Summer Day
Here’s a true story regarding the service temperature of solder joints. Yesterday, as I left work, I noticed that it felt really hot outside. I ...
Preheating Part VII - Lamp-Type Infrared and Ceramic Plate
Lamp style preheaters have the fastest response time of any of the previous preheaters mentioned in other posts. The lamp filament is practicall...
Applying Solder Preforms - Testing the Assembly
Finally – the fun part! After all of your work specifying the right materials and applying them, at last we can test all of the assumptions we h...
Changing the Composition of Your Tin-Lead Solder Pot
In today’s electronics manufacturing industry, many companies are using lead-free solder alloys. However, there are a few sectors in the industr...