Posted On: February 16th, 2015 | By: Indium Corporation®

Specifying Solder Preforms – Flux

Flux... It would be great to live in a world where we didn’t need it. Unfortunately, that same oxygen that keeps us alive slowly erodes the sold...

Posted On: February 10th, 2015 | By: Adam Murling

Fluxless Soldering

When I was learning about solder, I was very surprised when I......

Posted On: February 9th, 2015 | By: Dr. Andy Mackie

Die-Attach Soldering Using Indium Alloys

There are at least three significant reasons to use indium solder alloys in your die-attach operation: Physical performance, Supplier reliability, Mat...

Posted On: February 9th, 2015 | By: Indium Corporation®

Specifying Solder Preforms – Dimensions

Have you ever ordered something in the wrong size? It’s frustrating. Whether it’s a jacket that’s too tight or a refrigerator that i...

Posted On: February 2nd, 2015 | By: Indium Corporation®

Applying Solder Preforms – Regional Tech Support On Site

One of the best parts of working with Indium Corporation is the application assistance you will get as a customer. Most people wouldn’t think mu...

Posted On: January 26th, 2015 | By: Indium Corporation®

Specifying Solder Preforms - The Effect of Quantity

For a solder supplier, the value of knowing the potential demand volume for a part is more important than just to gauge future sales – it is imp...

Posted On: January 19th, 2015 | By: Indium Corporation®

Specifying Solder Preforms - The Perfect Alloy

I’ve always been a strong believer that a customer should not get a solder alloy that just “works” for their application, they shoul...

Posted On: January 12th, 2015 | By: Indium Corporation®

The World of Solder Preforms

Here at Indium Corporation we produce many forms of solder. With products like solder ingots, solder paste, and solder wire, we supply the alloys our ...

Posted On: January 8th, 2015 | By: Indium Corporation®

Specifying Solder Preforms

This is arguably the greatest time in history to be a consumer. A quick trip to the grocery store for something as simple as milk becomes a series of ...

Posted On: January 5th, 2015 | By: Ed Briggs

The Largest Trade-off in Printing UltraFine Solder Pastes is in Reflow

In a six-part SMT assembly series, we discussed the advantages of using fine powder solder pastes to improve process yields for stencil printing, espe...