Indium Corporation Regional Technical Manager and Technologist Advanced Applications Andreas Karch will present at iNEMI’s upcoming seminar, Humidity Robustness and Isolation Coordination for e-Mobility. The seminar, hosted by ZESTRON Europe, will be held on February 1 in Ingolstadt, Germany.
Andreas’ presentation, No-Clean Flux Residues in Automotive Applications Must Meet Higher Requirements, will examine the influence of no-clean flux chemistries on the reliability of automotive PCB applications. In particular, the study focuses on failure caused by dendritic growth for high-power, low-standoff components for enhanced SIR conditions.
Due to increased automotive electrification (48V, HEV, EV) and the subsequent utilization of high-power components such as DPAKs and Power-QFNs in under-the-hood electronics, the SIR (Surface Insulation Resistance) specifications for evaluating the electrical reliability of no-clean solder paste flux chemistry have also become more stringent. For example, test voltage has increased from 5V to 1050V, test time has increased from 168 to 5001,000 hours, pitch has decreased from 0.5mm to 0.20.3mm, and minimum SIR threshold has increased from 100M to 500M.
No-clean solder pastes are normally used in automotive PCB assembly to solder low-standoff components such as DPAKs and power-QFNs (gap between the PCB pad and the component underbody is typically under 75).
“During reflow, volatiles in the flux chemistry, such as activators and solvents, boil off; however, a lower standoff reduces the opportunity for the flux volatiles to vent, resulting in ‘wet’ flux residue post-reflow,” said Andreas. “It is, therefore, critical that the no-clean flux residue does not cause ionic dendritic growth and corrosion under low-standoff power components, throughout the working life of the product.”
Andreas serves as Technologist Advanced Applications and Technical Manager for Germany, Austria, and Switzerland for Indium Corporation. He has more than 20 years of experience in automotive electronics and power electronics, including the development of advanced customized solutions. In 2014, the Austrian Patent Office awarded him the “Inventum” award for his patent for innovate LED automotive lighting as one of the top ten applicants. He is an ECQA-certified development engineer and has earned the Six Sigma Yellow Belt.
關於 Indium Corporation
Indium Corporation 是全球電子、半導體、薄膜和熱管理市場的主要材料精煉商、冶煉商、製造商和供應商。產品包括焊料和助熔劑；銅钎；熱介面材料；濺鍍靶材；铟、鎵、锗、錫金屬和無機化合物；以及 NanoFoil 。公司成立於 1934 年，擁有全球性的技術支援，工廠分佈於中國、德國、印度、馬來西亞、新加坡、南韓、英國和美國。
如需更多關於 Indium Corporation 的資訊，請造訪www.indium.com或寄電子郵件給Jingya Huang。您也可以在www.linkedin.com/company/indium-corporation/ 追蹤我們的專家，From One Engineer To Another (#FOETA)。
