Indium Corporation has added to its line of thermal interface materials (TIMs) with the introduction of HSMF-OS, a non-silicone based metal/polymer material designed for burn-in and test applications.
HSMF-OS is designed for high insertion capability. Its high tensile strength and soft compliant polymer backing allow it to survive multiple insertions. HSMF-OS has been tested to withstand over 5,000 insertion cycles without any loss of performance.
One of the challenges associated with a burn-in TIM is the attachment method. HSMF-OS has inherent adhesive properties on one side that allow for hand placement, removing the need for these additional steps and fixtures without compromising thermal performance. The opposite side is aluminum and it will not mark or stain the DUI (device under test).
HSMF-OS offers consistently good performance without phase change.
For more information on HSMF-OS and Indium Corporation’s full line of TIMs, visit indiumstg.wpenginepowered.com/TIMs.
铟泰公司 是一家面向全球电子、半导体、薄膜及热管理 市场的顶级材料制造商和供应商。产品包括焊料和助焊剂；硬钎焊 ；热界面材料；溅射靶材 ；铟、镓（Ga） 、锗和锡等金属及无机材料化合物 ；以及NanoFoil®。该公司成立于1934年，拥有全球技术支持网络，并在中国、马来西亚 、新加坡 、韩国、英国和美国设有工厂。
如需了解铟泰公司更多信息，请访问indiumstg.wpenginepowered.com或发送电子邮件至 [email protected]。您还可以通过www.facebook.com/indium或@IndiumCorp 关注我们的专家团队“From One Engineer ToAnother®”（#FOETA）。
