First Visible Light LED Turns 50!
It is hard to believe, but 50 years ago, on October 9th, the first visible light LED was demonstrated by Nick Holonyak, Jr. of GE Advanced......
It is hard to believe, but 50 years ago, on October 9th, the first visible light LED was demonstrated by Nick Holonyak, Jr. of GE Advanced......
Ultrasonic Testing (UT), performed by acoustic microscopy, is a great way to determine the quality of a solder bond without destroying the assembly. ...
When helping customers with the optimization of their soldering process, the question often comes up; “What will my solder bond line thickn...
Here is a picture of an Indium Corporation solder flux pen, sectioned to show you the internals. Who DOESN’T want to see THAT, right?!? Fl...
About a month ago I posted about the various 3D technologies (chip creation, packaging and printed circuit boards) that are being used to op...
Folks, This year will mark the 10th anniversary of SMTA’s SMT Process Certification Course. This course was developed by Jim Hall, Phil Za...
Individually, indium and gallium each have some pretty interesting characteristics. Gallium is liquid at 30°C (86°F) and, because it is less t...
Folks, There is a lot of interest in cleaning PCBs that have been assembled with no-clean solder pastes. Recently I discussed the topic with my ...
Browse the coming attractions at your local movie theater. How many 3D movies are being advertised? 3D is a very exciting technology for m...
While it is important to have at least 10µm of solder on each side of a tabbing ribbon to form a proper solder joint during cell interconnection...
It is not often that we get a request for SIR (Surface Insulation Resistance) and/or ECM (Electro-Chemical Migration) results for a water washable/sol...