Indium Corporation’s Graham Wilson, Applications Engineer, will give a poster presentation at TEC Lund on Sept. 27 in Lund, Sweden.
Wilson will present High-Power Device Assembly: A Reinforced Matrix Solder Preform Solution for Bondline Control & Increased Reliability. This presentation explores how a solder preform with a reinforced matrix can maintain bondline coplanarity, improve reliability, and reduce the overall cost of ownership for a substrate as compared to current techniques, such as stamped bumps or stitched wire bonds on the substrate.
Wilson is a Senior Applications Engineer for Indium Corporation’s European operations. He supports customers with comprehensive technical advice on the selection, use, and application of solder pastes, fluxes, and engineered solders. He has more than 20 years of experience spanning a number of industries, including a focus on electronics assembly and thermal management. He is certified as a Six Sigma Green Belt through the Thayer School of Engineering at Dartmouth and shares his expertise at conferences internationally. Wilson earned his degree in HNC Electronics from the University of Northampton.
TEC Lund features discussions and exhibits on advanced and emerging technologies in printed circuit board design, the current component situation, as well as the latest innovations within electronics assembly technologies. Indium Corporation will also be exhibiting at this event.
铟泰公司 是一家面向全球电子、半导体、薄膜及热管理 市场的顶级材料制造商和供应商。产品包括焊料和助焊剂；硬钎焊 ；热界面材料；溅射靶材 ；铟、镓（Ga） 、锗和锡等金属及无机材料化合物 ；以及NanoFoil®。该公司成立于1934年，拥有全球技术支持网络，并在中国、马来西亚 、新加坡 、韩国、英国和美国设有工厂。
For more information about Indium Corporation, visit indiumstg.wpenginepowered.com or email [email protected]. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.facebook.com/indium or @IndiumCorp.
