Soldering to LTTF-6363 Thin-film Solar Cell Metallization Paste
You’re reading this because you want to know more about LTTF-6363 low temperature metallization paste right? Perfect. p style="margi...
You’re reading this because you want to know more about LTTF-6363 low temperature metallization paste right? Perfect. p style="margi...
Folks, The conclusion of the Bob and Fred break saga…... Phil stared, “The uptime on AXI’s four SMT production lines is…...
After a long and involved conversation with colleagues regarding attaching heat pipes using a low temperature solder, such as Indalloy 290 (97In 3Ag; ...
Folks, My interest was piqued by a recent article from the pen of good friend, Ray Rasmussen. In this a href="http://www.pcbdesign007.com/pa...
I just visited a customer that was converting from water soluble solder paste to no-clean. Not exactly a slam dunk transition as this customer found o...
Although most scientists today feel that alchemy has been widely discredited, and I have been taught to agree, the idea of it is whimsical and exhilar...
Folks, A compilation of my blog posts, titled, The Adventures Of Patty And The Professor, is now available in soft and hard copies. The advantage...
Spending back-to-back weeks at two electronics assembly trade shows is a unique experience, to me. First up was SMTAI in Orlando, FL where I...
Recently I was at a customer who reported that their SMT components were “blowing off” their PCB. In most of the instances the component w...
Indium Corporation will be at IMAPS 2010 (International Microelectronics and Packaging Society) – their 43rd International Sympos...
Lately I have been researching a bunch of things, one of my favorite topics being soldering alloys. For a long time most solder (nearly all) was compr...
I’ve received numerous questions about using gallium liquid metal alloys, so thought I’d present some of my answers for all. The cus...