博客

This week a customer in Asia asked why one of our new epoxy fluxes was not allowing the package-on-package (PoP) device to be picked up from the dipping tray. Obviously, the vacuum nozzle must have

Folks, Patty had been working with engineering on a new product that needed a very precise and controlled volume of the stencil printed “brick” of solder paste on the PWB pads. The product had

Folks, Let’s assume you are trying to improve the productivity of your SMT assembly lines. You work at a facility that manufactures high volume products with a high mix. The first aspect of your

Folks, The conclusion of the Bob and Fred break saga…… Phil stared, “The uptime on AXI’s four SMT production lines is…….” Fred and Bob were waiting for the good news of

(continued from previous post) “Fred break, Bob break?” Phil asked. Folks, The "Fred and Bob Breaks"saga continues, “Fred is the tech responsible for the stencil printer

Folks, Dr. Phil James, a former student of “The Professor”, gets a phone call, let’s listen in…… Phil James was staring out the window of his office in Exeter, NH.Fall

I just visited a customer that was converting from water soluble solder paste to no-clean. Not exactly a slam dunk transition as this customer found out. During my visit, solder balls and solder

尽管当今大多数科学家都认为炼金术已被广泛诋毁，我也被教导要同意这一点，但炼金术的想法是异想天开的，而且

最近我一直在研究很多东西，其中一个我最喜欢的主题就是焊接合金。长期以来，大多数焊料（几乎所有焊料）都是由锡铅共晶组成的。

I have previously discussed various reasons why thermal considerations in a device cannot be an afterthought.There are various methods for handling the thermal needs of a device before it becomes a

I’ve received numerous questions about using gallium liquid metal alloys, so thought I’d present some of my answers for all. The customerquestions are in black, and my responses in red.

… and we’re back on the question of “how small a solder powder particle do I need, to achieve a certain bump height or bump

This week’s topic is both wafer bumping and substrate bumping with solder paste, and the issue of powder

Solder paste is made to be reflowed in the SMT process. Exactly HOW that is done is critical to your success. Included in the Product Data Sheet, among other things, are parameters which guide the

The Northeast USA (as well as other parts of the country) have been experiencing quite a warm summer. And, if walking out into the humidity wasn't clue enough, I would just have to test the fit

Folks, The adventures of Patty and Rob continue……. Rob bolted upright in bed. He had that terrible feeling that he had overslept for an important appointment. His eyes quickly found the

Folks, The adventuresofPatty and Rob continue…….. “No way Rob. I can’t buy this one,” shouted Phil. “I’m telling you I did all of the calculations. I know it

Folks, Patty and Rob return from their honeymoon……. Patty had just finished some emails and was ready to head off to meet Rob and some of their buddies for

My friend and colleague, Eric Bastow, got back last month from an IPC standards meeting with some interesting news for those of us who supply and use solder

Wandering through the references to indium metalon the internet, I sometimes see it referred to as, "that 'rare'

Folks, After a bit of a break, the adventures of Patty, Rob, and The Professor continue: The plane droned on as it made its slow march from Detroit to Tokyo. Patty looked down at Rob as he slumbered